Thanks for the fast answer and simple solution (it works fine). This would help others too I think.
Just a little char can make such a difference ;-) On Wednesday 26 November 2003 17:02, Youri van Gorselen wrote: > I had to use mplayer -ac hwac3,mad, blablabla to get audio from non ac3 > tracks. > > Using a Sblive 5.1 with digital i/o from creative but that doesn;t make a > difference as far as i know. > > ----- Original Message ----- > From: "Aubin Paul" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, November 26, 2003 2:51 PM > Subject: Re: [Freevo-users] hwac3 (sb live pass through) option auto > detection or switch/falling back during playback possible ? > > > Add a comma after the hwac3 to fall back... > > > > i.e. > > > > mplayer -ac hwac3, > > > > On Wed, Nov 26, 2003 at 02:41:22PM +0100, Thomas Kranz wrote: > > > Hello freevo fans, > > > > > > my problem: > > > I've spent my sb live an Hoontech I/O III extension with optical > > digital out. > > > > Passing through with mplayer to my ac3 receiver > > > and the -ac hwac3 options works fine, if the audio stream of the movie > > is an ac3 track. > > > > But if I enable the options permanently in local_conf.py, I get no > > > sound from avi movies with non ac3 tracks (eg. lame mp3 encoded ones). > > > So I'm wondering if there is a solution for my problem. > > > > > > My Ideas: > > > Some options should be configurable in the freevo frontend. > > > Maybe a lirc command could change the option with my remote. > > > Switching this during playback would be nice or maybe an auto detection > > by mplayer > > > > but this wouldn't be safe (I guess) - or fallback to non hwac3, when > > audio codec detection fails. > > > > Any ideas or solutions around ? > > > > > > thanks, > > > Thomas > > > > > > my system: > > > 1.7GHZ Athlon XP, Gigabyte matx board, 384MB > > > dxr3,sb live with digital IO extension, Hauppauge WinTV > > > Realmagic Remote (great one, I love this remote because it's > > > flawless, great range and very handy) > > > > > > freevo 1.4, mplayer 0.92, using the dxr3 for tv out (selfcompiled sdl > > lib). > > > > Base System: SuSE 8.0, Kernel 2.4.22 with acpi patches > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > This SF.net email is sponsored by: SF.net Giveback Program. > > > Does SourceForge.net help you be more productive? Does it > > > help you create better code? SHARE THE LOVE, and help us help > > > YOU! Click Here: http://sourceforge.net/donate/ > > > _______________________________________________ > > > Freevo-users mailing list > > > [EMAIL PROTECTED] > > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > ------------------------------------------------------- > > This SF.net email is sponsored by: SF.net Giveback Program. > > Does SourceForge.net help you be more productive? Does it > > help you create better code? SHARE THE LOVE, and help us help > > YOU! Click Here: http://sourceforge.net/donate/ > > _______________________________________________ > > Freevo-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/freevo-users > > ------------------------------------------------------- > This SF.net email is sponsored by: SF.net Giveback Program. > Does SourceForge.net help you be more productive? Does it > help you create better code? SHARE THE LOVE, and help us help > YOU! Click Here: http://sourceforge.net/donate/ > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
