One other detail I forgot to mention. When I test my audio out from my winTV card, I have sound while I'm recording, so I know the card is producing the signal, just for some reason mencoder isn't receiving it. On Sun, 2004-02-01 at 17:15, Peter Howell wrote: > Thanks. That very nearly helps. It would definitely help if I had a > clue. It looks like using btaudio would be preferable, but it is not yet > compatible with mplayer or mencoder. That leaves me with the cable > running from the audio out on the TV card to my LINE_IN. What I get > from the instructions is that I need to run a script to turn the sound > on before I start recording and another to turn it off when I'm done. > This is where I get a little lost. The example scripts that are > available don't appear to actually be scripts (don't start with #!...) > so I don't know how it use them. There is a record script, but I don't > know how it implement it. Is this compatible with the new > record_server, or does this date back to the daemon? > > Just when I thought I was getting the hang of this....:-) > > Thanks again, > Peter > > > On Sun, 2004-02-01 at 15:24, Michael Ruelle wrote: > > please look at: > > > > http://freevo.sourceforge.net/cgi-bin/moin.cgi/RecordingInfo > > > > if you are using lineIn to record then look at the TV LineIn section. -- Peter Howell <[EMAIL PROTECTED]>
------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
