[Freevo-users] LCD Cfontz 634

[Justin T Wetherell]

I have the Cfontz 634 LCD with the serial to USB connector. I am running 
Slackware 9.1 with Kernel 2.4.22. I am trying to get them to work 
together. I changed mt minicom set-up for ttyUSB0, 19200 baud, and no 
flow control, saved that set-up as minirc.dfl. I then can output test to 
the LCD screen.

Now, I am trying to work with LCDproc (0.5 CVS). I copied minirc.dfl to 
minirc.usb0 and then setup /etc/LCDd.conf. Here is the the set-up:

[server]
Driver=CFontz
[CFontz]
Device=/dev/ttyUSB0
Size=20x4
Contrast=140
Brightness=255
OffBrightness=0
Speed=19200
NewFirmware=yes
Reboot=no
USB=yes
When I start LCDd and the lcdproc, all I get is a blank screen without 
the blinking cursor. When I change the driver to curses, I get the 
normal output onto my computer CRT (not lcd).

Anyone have any suggestions?



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users