Hi
I have two G400 dual monitor. I got installed freevo and it runs fine on my monitor but not picture on my TV via the S-Video converter thing that came with the card. Any ideas on where to flind information on how to troubleshoot the card ? thanks Alvaro
Note : I have read the freevo matroxfb faq but still no luck I have tried compiling the matroxfb stuff as modules and in the kernel no signal either way. I tried adding the following to the startup script without luck
#/bin/sh # do not forget to : # # chmod +x /etc/init.d/g400 # cd /etc/rc2.d # ln -s ../init.d/g400 S99g400 # reset framebuffer matroxset -f /dev/fb0 -m 0 echo "1" matroxset -f /dev/fb1 -m 0 matroxset -f /dev/fb0 -m 1 matroxset -f /dev/fb0 -o 0 128 echo "2" fbset -fb /dev/fb0 640x480-60 echo "2" # set up 800x600 w/ NTSC tv-out matroxset -f /dev/fb1 -m 0 matroxset -f /dev/fb0 -m 3 matroxset -f /dev/fb0 -o 1 2 fbset -fb /dev/fb1 -xres 800 -yres 600
------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Freevo-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freevo-users
