I made a special patch to record/watch from a composite input, you need to add this to your local_config.py:
# Composite Recordings
CMP_INPUT = 1
CMP_PRE_REC = ('amixer sset Mic unmute cap');
CMP_CMD = (CONF.mencoder + ' ' +
'tv:// ' +
'-tv driver=%s:input=%d' % (TV_DRIVER, CMP_INPUT) +
':norm=%s' % CONF.tv +
':width=%d:height=%d' % (TV_REC_SIZE[0], TV_REC_SIZE[1]) +
':outfmt=%s' % TV_REC_OUTFMT +
':device=%s' % TV_DEVICE +
VCR_AUDIO + ' ' +
'-ovc lavc -lavcopts ' +
'vcodec=mpeg4' +
':vqscale=3 ' +
'-oac mp3lame -lameopts ' +
'br=128:cbr:mode=3 ' +
'-ffourcc divx ' +
'-endpos %(seconds)s ' +
'-o %(filename)s')
CMP_POST_REC = ('amixer sset Mic mute');
and then add a channel to TV_CHANNELS:
('composite', '01 DIGITAL', '1')
CMP_INPUT = 1
CMP_PRE_REC = ('amixer sset Mic unmute cap');
CMP_CMD = (CONF.mencoder + ' ' +
'tv:// ' +
'-tv driver=%s:input=%d' % (TV_DRIVER, CMP_INPUT) +
':norm=%s' % CONF.tv +
':width=%d:height=%d' % (TV_REC_SIZE[0], TV_REC_SIZE[1]) +
':outfmt=%s' % TV_REC_OUTFMT +
':device=%s' % TV_DEVICE +
VCR_AUDIO + ' ' +
'-ovc lavc -lavcopts ' +
'vcodec=mpeg4' +
':vqscale=3 ' +
'-oac mp3lame -lameopts ' +
'br=128:cbr:mode=3 ' +
'-ffourcc divx ' +
'-endpos %(seconds)s ' +
'-o %(filename)s')
CMP_POST_REC = ('amixer sset Mic mute');
and then add a channel to TV_CHANNELS:
('composite', '01 DIGITAL', '1')
You also need to replace the following files:
src/tv/plugins/generic_record.py
src/helpers/recordserver.py
with the attached files.
On 1/24/06, Davide dada Carboni <[EMAIL PROTECTED]> wrote:
On 1/24/06, Stian Næprud <[EMAIL PROTECTED]> wrote:
> I think I have posted before, with no response.... But I have
> struggled with this for 2 weeks now, trying different settings found
> in Wiki and mailling lists. So please, some gurues out there, help me
> with this. The audio goes to my default soundcard and line in.
>
> My card is a Hauppage WinTV GO2 and I am running Fedora core 3.
> Installed Freevo with yum.
>
> I can watch the composite input in Freevo with theese settings, but
> how do I record:
>
I suspect you need some VCR_CMD with executes mencoder. I have the same
card but I use mencoder to get the stream directly from the TV In. In
your case you should find a way to instruct mencoder to acquire from
composite instead of TV.
--
La gente vuole le manopole
(Anonimo inventore)
--
http://people.crs4.it/dcarboni
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
