No sorry.... I am not sure. How should I know? I am running a Fedora
Core 3. Any idea what I should check or look for. I can watch the
composite input fine in TvTime. Thats all I know. I do not know much
about video in linux...
On 1/25/06, Justin Wetherell <[EMAIL PROTECTED]> wrote:
> tv:// -tv
> driver=v4l:input=1:norm=pal:width=320:height=240:outfmt=yuy2:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64
> -ovc lavc -lavcopts vcodec=mpeg4:vqscale=3 -oac mp3lame -lameopts
> br=128:cbr:mode=3 -ffourcc divx
>
> Are you sure that the line above if correct for recording on your system?
>
> On 1/25/06, Stian Næprud <[EMAIL PROTECTED]> wrote:
>
> > Nothing gets recorded. Looks like the recordserver give up.
> >
> > 2006/01/25 16:16 CET [-] Log opened.
> > 2006/01/25 16:16 CET [-]
> *************************************************
> > 2006/01/25 16:16 CET [-] ** Warning: No recording plugin registered. **
> > 2006/01/25 16:16 CET [-] ** Check your local_conf.py for a **
> > 2006/01/25 16:16 CET [-] ** bad "plugin_record =" line or **
> > 2006/01/25 16:16 CET [-] ** this log for a plugin failure. **
> > 2006/01/25 16:16 CET [-] ** Recordings will fail! **
> > 2006/01/25 16:16 CET [-]
> *************************************************
> > 2006/01/25 16:16 CET [*RecordServer*] twisted.web.server.Site starting on
> 18001
> > 2006/01/25 16:16 CET [*RecordServer*] Starting factory
> > <twisted.web.server.Site instance at 0xb75e40cc>
> > 2006/01/25 16:21 CET [*RecordServer*] Sending CMP_PRE_REC
> > 2006/01/25 16:21 CET [*RecordServer*] popen tv:// -tv
> >
> driver=v4l:input=1:norm=pal:width=320:height=240:outfmt=yuy2:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64
> > -ovc lavc -lavcopts vcodec=mpeg4:vqscale=3 -oac mp3lame -lameopts
> > br=128:cbr:mode=3 -ffourcc divx -endpos 229 -o
> >
> /home/freevo/Video/Recordings/01-25_16_21_Manual_Record.avi
> > 2006/01/25 16:21 CET [*RecordServer*] killing pid 5388 with sig 15
> > 2006/01/25 16:21 CET [*RecordServer*] recorderver: After wait()
> > 2006/01/25 16:21 CET [*RecordServer*] waiting on pid 5388
> > 2006/01/25 16:21 CET [*RecordServer*] no imagefile found
> > 2006/01/25 16:21 CET [*RecordServer*] Sending CMP_POST_REC
> >
> > On 1/25/06, Stian Næprud <[EMAIL PROTECTED]> wrote:
> > > I will try it later to day. Yes please give me the link to the update.
> > >
> > > On 1/25/06, Justin Wetherell < [EMAIL PROTECTED]> wrote:
> > > > Actually, I found the error and fixed it but it's not a big thing.
> Update
> > > > available via link, if you'd like it.
> > > >
> > > >
> > > > On 1/24/06, Justin Wetherell < [EMAIL PROTECTED]> wrote:
> > > > > I get the same error but it all seems to work correctly, so I just
> ignore
> > > > it.
> > > > >
> > > > >
> > > > >
> > > > > On 1/24/06, Stian Næprud < [EMAIL PROTECTED] > wrote:
> > > > > > Thanks! Getting another error now....
> > > > > >
> > > > > > 2006/01/24 20:17 CET [-] Log opened.
> > > > > > 2006/01/24 20:17 CET [-]
> > > > *************************************************
> > > > > > 2006/01/24 20:17 CET [-] ** Warning: No recording plugin
> registered.
> > > > **
> > > > > > 2006/01/24 20:17 CET [-] ** Check your local_conf.py for
> a
> > > > **
> > > > > > 2006/01/24 20:17 CET [-] ** bad "plugin_record =" line
> or
> > > > **
> > > > > > 2006/01/24 20:17 CET [-] ** this log for a plugin
> failure.
> > > > **
> > > > > > 2006/01/24 20:17 CET [-] ** Recordings will fail!
> > > > **
> > > > > > 2006/01/24 20:17 CET [-]
> > > > *************************************************
> > > > > > 2006/01/24 20:17 CET [*RecordServer*] twisted.web.server.Site
> starting
> > > > on
> > > > > >
> > > > > > What should I set in the local_conf?
> > > > > >
> > > > > > On 1/24/06, Justin Wetherell < [EMAIL PROTECTED] > wrote:
> > > > > > > I changed it on the website, if that helps.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On 1/24/06, Justin Wetherell < [EMAIL PROTECTED]> wrote:
> > > > > > > > Whooops.... change rec_prog.channel_id to prog.channel_id on
> line
> > > > 1004.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On 1/24/06, Stian Næprud < [EMAIL PROTECTED] > wrote:
> > > > > > > > > Getting closer... But I get an error in the recordserverlog:
> > > > > > > > >
> > > > > > > > > 2006/01/24 20:31 CET [*RecordServer*] Sending CMP_PRE_REC
> > > > > > > > > 2006/01/24 20:31 CET [*RecordServer*] popen tv:// -tv
> > > > > > > > >
> > > > > > >
> > > >
> driver=v4l:input=1:norm=pal:width=320:height=240:outfmt=yuy2:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64
> > > > > > > > > -ovc lavc -lavcopts vcodec=mpeg4:vqscale=3 -oac mp3lame
> -lameopts
> > > > > > > > > br=128:cbr:mode=3 -ffourcc divx -endpos 229 -o
> > > > > > > > >
> > > > > > >
> > > >
> /home/freevo/Video/Recordings/01-24_20_31_Manual_Record.avi
> > > > > > > > > 2006/01/24 20:31 CET [*RecordServer*] killing pid 4669 with
> sig 15
> > > > > > > > > 2006/01/24 20:31 CET [*RecordServer*] recorderver: After
> wait()
> > > > > > > > > 2006/01/24 20:31 CET [*RecordServer*] waiting on pid 4669
> > > > > > > > > 2006/01/24 20:31 CET [*RecordServer*] no imagefile found
> > > > > > > > > 2006/01/24 20:31 CET [*RecordServer*] Traceback (most recent
> call
> > > > last):
> > > > > > > > > File
> > > > > > >
> > > >
> "/usr/lib/python2.3/site-packages/twisted/python/log.py",
> > > > > > > line
> > > > > > > > > 52, in callWithContext
> > > > > > > > > return context.call({ILogContext: newCtx}, func,
> *args,
> > > > **kw)
> > > > > > > > > File
> > > > > > >
> > > >
> "/usr/lib/python2.3/site-packages/twisted/python/context.py",
> > > > > > > > > line 43, in callWithContext
> > > > > > > > > return func(*args,**kw)
> > > > > > > > > File
> > > > > > >
> > > >
> "/usr/lib/python2.3/site-packages/twisted/internet/default.py",
> > > > > > > > > line 126, in run
> > > > > > > > > self.mainLoop()
> > > > > > > > > File
> > > > > > >
> > > >
> "/usr/lib/python2.3/site-packages/twisted/internet/default.py",
> > > > > > > > > line 134, in mainLoop
> > > > > > > > > self.runUntilCurrent()
> > > > > > > > > --- <exception caught here> ---
> > > > > > > > > File
> > > > > > >
> > > >
> "/usr/lib/python2.3/site-packages/twisted/internet/base.py",
> > > > > > > > > line 423, in runUntilCurrent
> > > > > > > > > call.func(*call.args, **call.kw)
> > > > > > > > > File
> > > > > > >
> > > >
> "/usr/lib/python2.3/site-packages/freevo/helpers/recordserver.py",
> > > > > > > > > line 1004, in handleEvents
> > > > > > > > > if config.CMP_POST_REC and rec_prog.channel_id ==
> > > > > > > 'composite':
> > > > > > > > > exceptions.NameError: global name 'rec_prog' is not
> defined
> > > > > > > > >
> > > > > > > > > On 1/24/06, Justin Wetherell < [EMAIL PROTECTED]>
> wrote:
> > > > > > > > > > I made a special patch to record/watch from a composite
> input,
> > > > you
> > > > > > > need to
> > > > > > > > > > add this to your local_config.py:
> > > > > > > > > >
> > > > > > > > > > # Composite Recordings
> > > > > > > > > > CMP_INPUT = 1
> > > > > > > > > > CMP_PRE_REC = ('amixer sset Mic unmute cap');
> > > > > > > > > > CMP_CMD = (CONF.mencoder + ' ' +
> > > > > > > > > > 'tv:// ' +
> > > > > > > > > > '-tv driver=%s:input=%d' % (TV_DRIVER,
> CMP_INPUT) +
> > > > > > > > > > ':norm=%s' % CONF.tv +
> > > > > > > > > > ':width=%d:height=%d' %
> > > > (TV_REC_SIZE[0],
> > > > > > > TV_REC_SIZE[1]) +
> > > > > > > > > > ':outfmt=%s' % TV_REC_OUTFMT +
> > > > > > > > > > ':device=%s' % TV_DEVICE +
> > > > > > > > > > VCR_AUDIO + ' ' +
> > > > > > > > > > '-ovc lavc -lavcopts ' +
> > > > > > > > > > 'vcodec=mpeg4' +
> > > > > > > > > > ':vqscale=3 ' +
> > > > > > > > > > '-oac mp3lame -lameopts ' +
> > > > > > > > > > 'br=128:cbr:mode=3 ' +
> > > > > > > > > > '-ffourcc divx ' +
> > > > > > > > > > '-endpos %(seconds)s ' +
> > > > > > > > > > '-o %(filename)s')
> > > > > > > > > > CMP_POST_REC = ('amixer sset Mic mute');
> > > > > > > > > >
> > > > > > > > > > and then add a channel to TV_CHANNELS:
> > > > > > > > > > ('composite', '01 DIGITAL', '1')
> > > > > > > > > >
> > > > > > > > > > You also need to replace the following files:
> > > > > > > > > > src/tv/plugins/generic_record.py
> > > > > > > > > > src/helpers/recordserver.py
> > > > > > > > > > with the attached files.
> > > > > > > > > >
> http://freevohelp.com/FILES/generic_record.py
> > > > > > > > > >
> http://freevohelp.com/FILES/recordserver.py
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > On 1/24/06, Davide dada Carboni <[EMAIL PROTECTED]>
> wrote:
> > > > > > > > > > > On 1/24/06, Stian Næprud < [EMAIL PROTECTED] >
> wrote:
> > > > > > > > > > > > I think I have posted before, with no response.... But
> I
> > > > have
> > > > > > > > > > > > struggled with this for 2 weeks now, trying different
> > > > settings
> > > > > > > found
> > > > > > > > > > > > in Wiki and mailling lists. So please, some gurues out
> > > > there, help
> > > > > > > me
> > > > > > > > > > > > with this. The audio goes to my default soundcard and
> line
> > > > in.
> > > > > > > > > > > >
> > > > > > > > > > > > My card is a Hauppage WinTV GO2 and I am running
> Fedora core
> > > > 3.
> > > > > > > > > > > > Installed Freevo with yum.
> > > > > > > > > > > >
> > > > > > > > > > > > I can watch the composite input in Freevo with theese
> > > > settings,
> > > > > > > but
> > > > > > > > > > > > how do I record:
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > I suspect you need some VCR_CMD with executes mencoder.
> I have
> > > > the
> > > > > > > same
> > > > > > > > > > > card but I use mencoder to get the stream directly from
> the TV
> > > > In.
> > > > > > > In
> > > > > > > > > > > your case you should find a way to instruct mencoder to
> > > > acquire from
> > > > > > > > > > > composite instead of TV.
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > La gente vuole le manopole
> > > > > > > > > > > (Anonimo inventore)
> > > > > > > > > > > --
> > > > > > > > > > > http://people.crs4.it/dcarboni
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > >
> > > >
> -------------------------------------------------------
> > > > > > > > > > > This SF.net email is sponsored by: Splunk Inc. Do you
> grep
> > > > through
> > > > > > > log
> > > > > > > > > > files
> > > > > > > > > > > for problems? Stop! Download the new AJAX search
> engine that
> > > > makes
> > > > > > > > > > > searching your log files as easy as surfing the web.
> > > > DOWNLOAD
> > > > > > > SPLUNK!
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > >
> > > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > > > > > > > >
> > > > _______________________________________________
> > > > > > > > > > > Freevo-users mailing list
> > > > > > > > > > > [email protected]
> > > > > > > > > > >
> > > > > > >
> > > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Stian Næprud
> > > > > > > > > Elvevegen
> > > > > > > > > 2642 Kvam
> > > > > > > > > +47 95 04 82 81
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > >
> -------------------------------------------------------
> > > > > > > > > This SF.net email is sponsored by: Splunk Inc. Do you grep
> through
> > > > log
> > > > > > > files
> > > > > > > > > for problems? Stop! Download the new AJAX search engine
> that
> > > > makes
> > > > > > > > > searching your log files as easy as surfing the web.
> DOWNLOAD
> > > > SPLUNK!
> > > > > > > > >
> > > > > > >
> > > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > > > > > >
> _______________________________________________
> > > > > > > > > Freevo-users mailing list
> > > > > > > > > [email protected]
> > > > > > > > >
> > > > > > >
> > > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Stian Næprud
> > > > > > Elvevegen
> > > > > > 2642 Kvam
> > > > > > +47 95 04 82 81
> > > > > >
> > > > > >
> > > > > >
> -------------------------------------------------------
> > > > > > This SF.net email is sponsored by: Splunk Inc. Do you grep through
> log
> > > > files
> > > > > > for problems? Stop! Download the new AJAX search engine that
> makes
> > > > > > searching your log files as easy as surfing the web. DOWNLOAD
> SPLUNK!
> > > > > >
> > > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > > > > _______________________________________________
> > > > > > Freevo-users mailing list
> > > > > > [email protected]
> > > > > >
> > > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> > > --
> > > Stian Næprud
> > > Elvevegen
> > > 2642 Kvam
> > > +47 95 04 82 81
> > >
> >
> >
> > --
> > Stian Næprud
> > Elvevegen
> > 2642 Kvam
> > +47 95 04 82 81
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: Splunk Inc. Do you grep through log
> files
> > for problems? Stop! Download the new AJAX search engine that makes
> > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
> >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > _______________________________________________
> > Freevo-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/freevo-users
> >
>
>
--
Stian Næprud
Elvevegen
2642 Kvam
+47 95 04 82 81
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
