Thanks! Will do when I get there. Now I get a segmentation fault
trying mencoder with the same options as mplayer. If I do it without
the "outfmt=yuy2" it records, but only half og the picture shows, rest
is black.
mencoder -tv
driver=v4l2:fps=25:norm=PAL-DK:device=/dev/video0:input=2:width=768:height=576:outfmt=yuy2:contrast=25:brightness=60:hue=50:saturation=50:adevice=/dev/dsp:forceaudio:forcechan=1:audiorate=32000:volume=100:buffersize=64
tv:// -aspect 4:3 -o tv2.avi -ovc lavc -lavcopts
vcodec=mpeg4:vbitrate=1200 -oac mp3lame -lameopts br=128:cbr:mode=3
-ffourcc divx
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/share/locale
MEncoder 1.0pre7-3.4.3 (C) 2000-2005 MPlayer Team
CPU: Intel Pentium 4/Xeon/Celeron Foster (Family: 8, Stepping: 9)
Detected cache-line size is 64 bytes
CPUflags: Type: 8 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection.
File not found: 'frameno.avi'
Failed to open frameno.avi
success: format: 9 data: 0x0 - 0x0
TV detected! ;-)
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[EMAIL PROTECTED]>
comment: first try, more to come ;-)
Selected device: Hauppauge WinTV 34xxx models
Tuner cap: STEREO LANG1 LANG2
Tuner rxs: MONO
Capabilites: video capture VBI capture device tuner read/write streaming
supported norms: 0 = NTSC-M; 1 = NTSC-JP; 2 = PAL-BG; 3 = PAL-DK; 4 =
PAL-I; 5 = PAL-M; 6 = PAL-N; 7 = PAL-Nc; 8 = PAL-60; 9 = SECAM-L; 10 =
SECAM-DK;
inputs: 0 = Television; 1 = for debug only; 2 = Composite1; 3 = S-Video;
Current input: 2
Current format: BGR24
v4l2: current audio mode is : MONO
audio block size too low, setting to 8192!
[V] filefmt:9 fourcc:0x32595559 size:768x576 fps:25.00 ftime:=0.0400
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 32000 Hz, 1 ch, s16le, 512.0 kbit/100.00% (ratio: 64000->64000)
Selected audio codec: [pcm] afm:pcm (Uncompressed PCM)
==========================================================================
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1 (-1=autodetect) osd: 1
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 768 x 576 (preferred csp: Packed YUY2)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Packed YUY2 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
SwScaler: reducing / aligning filtersize 1 -> 4
SwScaler: reducing / aligning filtersize 1 -> 4
SwScaler: reducing / aligning filtersize 1 -> 1
SwScaler: reducing / aligning filtersize 9 -> 8
SwScaler: BICUBIC scaler, from Packed YUY2 to Planar YV12 using MMX2
videocodec: libavcodec (768x576 fourcc=34504d46 [FMP4])
Selected video codec: [rawyuy2] vfm:raw (RAW YUY2)
==========================================================================
Forcing output fourcc to 78766964 [divx]
MP3 audio selected
Building audio filter chain for 32000Hz/1ch/s16le -> 32000Hz/1ch/s16le...
Writing AVI header...
ODML: Aspect information not (yet?) available or unspecified, not
writing vprp h eader.
Forcing audio preload to 0, max pts correction to 0
Segmentation fault
On 1/27/06, Justin Wetherell <[EMAIL PROTECTED]> wrote:
> You can mute and unmute the line-in with the PRE and POST commands then
> everything should work fine.
>
>
> On 1/27/06, Stian Næprud < [EMAIL PROTECTED]> wrote:
> > Not giving up.... I am trying to understand the mencoder commands, but
> > I thougt it would be best to get the mplayer to work first. I am
> > getting a perfect picture with this command, but no sound.
> > mplayer -tv
> driver=v4l2:fps=25:norm=PAL-DK:device=/dev/video0:input=2:width=768:height=576:outfmt=yuy2:contrast=25:brightness=60:hue=50:saturation=50:adevice=/dev/dsp:forceaudio:forcechan=1:audiorate=32000:volume=100:buffersize=64
> > tv:// -aspect 4:3
> >
> > I also tried with adevice=alsa. If I start aumix and turn up the line
> > input sound is fine. Is there anything else I should add to this
> > command?
> >
> >
> >
> > On 1/25/06, John Molohan < [EMAIL PROTECTED]> wrote:
> > > Copy the entire command into a terminal and see if mplayer fails and if
> > > so on which option.
> > >
> > > Stian Næprud wrote:
> > >
> > > >No sorry.... I am not sure. How should I know? I am running a Fedora
> > > >Core 3. Any idea what I should check or look for. I can watch the
> > > >composite input fine in TvTime. Thats all I know. I do not know much
> > > >about video in linux...
> > > >
> > > >On 1/25/06, Justin Wetherell <[EMAIL PROTECTED]> wrote:
> > > >
> > > >
> > > >>tv:// -tv
> > >
> >>driver=v4l:input=1:norm=pal:width=320:height=240:outfmt=yuy2:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64
> > > >>-ovc lavc -lavcopts vcodec=mpeg4:vqscale=3 -oac mp3lame -lameopts
> > > >>br=128:cbr:mode=3 -ffourcc divx
> > > >>
> > > >>Are you sure that the line above if correct for recording on your
> system?
> > > >>
> > > >>On 1/25/06, Stian Næprud < [EMAIL PROTECTED]> wrote:
> > > >>
> > > >>
> > > >>
> > > >>>Nothing gets recorded. Looks like the recordserver give up.
> > > >>>
> > > >>>2006/01/25 16:16 CET [-] Log opened.
> > > >>>2006/01/25 16:16 CET [-]
> > > >>>
> > > >>>
> > > >>*************************************************
> > > >>
> > > >>
> > > >>>2006/01/25 16:16 CET [-] ** Warning: No recording plugin registered.
> **
> > > >>>2006/01/25 16:16 CET [-] ** Check your local_conf.py for a
> **
> > > >>>2006/01/25 16:16 CET [-] ** bad "plugin_record =" line or
> **
> > > >>>2006/01/25 16:16 CET [-] ** this log for a plugin failure.
> **
> > > >>>2006/01/25 16:16 CET [-] ** Recordings will fail!
> **
> > > >>>2006/01/25 16:16 CET [-]
> > > >>>
> > > >>>
> > > >>*************************************************
> > > >>
> > > >>
> > > >>>2006/01/25 16:16 CET [*RecordServer*] twisted.web.server.Site
> starting on
> > > >>>
> > > >>>
> > > >>18001
> > > >>
> > > >>
> > > >>>2006/01/25 16:16 CET [*RecordServer*] Starting factory
> > > >>>< twisted.web.server.Site instance at 0xb75e40cc>
> > > >>>2006/01/25 16:21 CET [*RecordServer*] Sending CMP_PRE_REC
> > > >>>2006/01/25 16:21 CET [*RecordServer*] popen tv:// -tv
> > > >>>
> > > >>>
> > > >>>
> > >
> >>driver=v4l:input=1:norm=pal:width=320:height=240:outfmt=yuy2:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64
> > > >>
> > > >>
> > > >>>-ovc lavc -lavcopts vcodec=mpeg4:vqscale=3 -oac mp3lame -lameopts
> > > >>>br=128:cbr:mode=3 -ffourcc divx -endpos 229 -o
> > > >>>
> > > >>>
> > > >>>
> > >
> >>/home/freevo/Video/Recordings/01-25_16_21_Manual_Record.avi
> > > >>
> > > >>
> > > >>>2006/01/25 16:21 CET [*RecordServer*] killing pid 5388 with sig 15
> > > >>>2006/01/25 16:21 CET [*RecordServer*] recorderver: After wait()
> > > >>>2006/01/25 16:21 CET [*RecordServer*] waiting on pid 5388
> > > >>>2006/01/25 16:21 CET [*RecordServer*] no imagefile found
> > > >>>2006/01/25 16:21 CET [*RecordServer*] Sending CMP_POST_REC
> > > >>>
> > > >>>On 1/25/06, Stian Næprud <[EMAIL PROTECTED]> wrote:
> > > >>>
> > > >>>
> > > >>>>I will try it later to day. Yes please give me the link to the
> update.
> > > >>>>
> > > >>>>On 1/25/06, Justin Wetherell < [EMAIL PROTECTED]> wrote:
> > > >>>>
> > > >>>>
> > > >>>>>Actually, I found the error and fixed it but it's not a big thing.
> > > >>>>>
> > > >>>>>
> > > >>Update
> > > >>
> > > >>
> > > >>>>>available via link, if you'd like it.
> > > >>>>>
> > > >>>>>
> > > >>>>>On 1/24/06, Justin Wetherell < [EMAIL PROTECTED]> wrote:
> > > >>>>>
> > > >>>>>
> > > >>>>>>I get the same error but it all seems to work correctly, so I just
> > > >>>>>>
> > > >>>>>>
> > > >>ignore
> > > >>
> > > >>
> > > >>>>>it.
> > > >>>>>
> > > >>>>>
> > > >>>>>>
> > > >>>>>>On 1/24/06, Stian Næprud < [EMAIL PROTECTED] > wrote:
> > > >>>>>>
> > > >>>>>>
> > > >>>>>>>Thanks! Getting another error now....
> > > >>>>>>>
> > > >>>>>>>2006/01/24 20:17 CET [-] Log opened.
> > > >>>>>>>2006/01/24 20:17 CET [-]
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>*************************************************
> > > >>>>>
> > > >>>>>
> > > >>>>>>>2006/01/24 20:17 CET [-] ** Warning: No recording plugin
> > > >>>>>>>
> > > >>>>>>>
> > > >>registered.
> > > >>
> > > >>
> > > >>>>>**
> > > >>>>>
> > > >>>>>
> > > >>>>>>>2006/01/24 20:17 CET [-] ** Check your local_conf.py
> for
> > > >>>>>>>
> > > >>>>>>>
> > > >>a
> > > >>
> > > >>
> > > >>>>>**
> > > >>>>>
> > > >>>>>
> > > >>>>>>>2006/01/24 20:17 CET [-] ** bad "plugin_record =" line
> > > >>>>>>>
> > > >>>>>>>
> > > >>or
> > > >>
> > > >>
> > > >>>>>**
> > > >>>>>
> > > >>>>>
> > > >>>>>>>2006/01/24 20:17 CET [-] ** this log for a plugin
> > > >>>>>>>
> > > >>>>>>>
> > > >>failure.
> > > >>
> > > >>
> > > >>>>>**
> > > >>>>>
> > > >>>>>
> > > >>>>>>>2006/01/24 20:17 CET [-] ** Recordings will fail!
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>**
> > > >>>>>
> > > >>>>>
> > > >>>>>>>2006/01/24 20:17 CET [-]
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>*************************************************
> > > >>>>>
> > > >>>>>
> > > >>>>>>>2006/01/24 20:17 CET [*RecordServer*] twisted.web.server.Site
> > > >>>>>>>
> > > >>>>>>>
> > > >>starting
> > > >>
> > > >>
> > > >>>>>on
> > > >>>>>
> > > >>>>>
> > > >>>>>>>What should I set in the local_conf?
> > > >>>>>>>
> > > >>>>>>>On 1/24/06, Justin Wetherell < [EMAIL PROTECTED] > wrote:
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>>I changed it on the website, if that helps.
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>On 1/24/06, Justin Wetherell < [EMAIL PROTECTED] > wrote:
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>Whooops.... change rec_prog.channel_id to prog.channel_id on
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>line
> > > >>
> > > >>
> > > >>>>>1004.
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>>
> > > >>>>>>>>>On 1/24/06, Stian Næprud < [EMAIL PROTECTED] > wrote:
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>>>Getting closer... But I get an error in the recordserverlog:
> > > >>>>>>>>>>
> > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] Sending CMP_PRE_REC
> > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] popen tv:// -tv
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > >
> >>driver=v4l:input=1:norm=pal:width=320:height=240:outfmt=yuy2:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forceaudio:forcechan=1:buffersize=64
> > > >>
> > > >>
> > > >>>>>>>>>>-ovc lavc -lavcopts vcodec=mpeg4:vqscale=3 -oac mp3lame
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>-lameopts
> > > >>
> > > >>
> > > >>>>>>>>>>br=128:cbr:mode=3 -ffourcc divx -endpos 229 -o
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > >
> >>/home/freevo/Video/Recordings/01-24_20_31_Manual_Record.avi
> > > >>
> > > >>
> > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] killing pid 4669 with
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>sig 15
> > > >>
> > > >>
> > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] recorderver: After
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>wait()
> > > >>
> > > >>
> > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] waiting on pid 4669
> > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] no imagefile found
> > > >>>>>>>>>>2006/01/24 20:31 CET [*RecordServer*] Traceback (most recent
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>call
> > > >>
> > > >>
> > > >>>>>last):
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>>> File
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > >
> >>"/usr/lib/python2.3/site-packages/twisted/python/log.py",
> > > >>
> > > >>
> > > >>>>>>>>line
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>>52, in callWithContext
> > > >>>>>>>>>> return context.call({ILogContext: newCtx}, func,
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>*args,
> > > >>
> > > >>
> > > >>>>>**kw)
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>>> File
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > >
> >>"/usr/lib/python2.3/site-packages/twisted/python/context.py",
> > > >>
> > > >>
> > > >>>>>>>>>>line 43, in callWithContext
> > > >>>>>>>>>> return func(*args,**kw)
> > > >>>>>>>>>> File
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > >
> >>"/usr/lib/python2.3/site-packages/twisted/internet/default.py",
> > > >>
> > > >>
> > > >>>>>>>>>>line 126, in run
> > > >>>>>>>>>> self.mainLoop()
> > > >>>>>>>>>> File
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > >
> >>"/usr/lib/python2.3/site-packages/twisted/internet/default.py",
> > > >>
> > > >>
> > > >>>>>>>>>>line 134, in mainLoop
> > > >>>>>>>>>> self.runUntilCurrent()
> > > >>>>>>>>>> --- <exception caught here> ---
> > > >>>>>>>>>> File
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > >
> >>"/usr/lib/python2.3/site-packages/twisted/internet/base.py",
> > > >>
> > > >>
> > > >>>>>>>>>>line 423, in runUntilCurrent
> > > >>>>>>>>>> call.func(*call.args, **call.kw)
> > > >>>>>>>>>> File
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > >
> >>"/usr/lib/python2.3/site-packages/freevo/helpers/recordserver.py",
> > > >>
> > > >>
> > > >>>>>>>>>>line 1004, in handleEvents
> > > >>>>>>>>>> if config.CMP_POST_REC and rec_prog.channel_id ==
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>'composite':
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>> exceptions.NameError: global name 'rec_prog' is not
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>defined
> > > >>
> > > >>
> > > >>>>>>>>>>On 1/24/06, Justin Wetherell < [EMAIL PROTECTED]>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>wrote:
> > > >>
> > > >>
> > > >>>>>>>>>>>I made a special patch to record/watch from a composite
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>
> > > >>input,
> > > >>
> > > >>
> > > >>>>>you
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>need to
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>>>add this to your local_config.py:
> > > >>>>>>>>>>>
> > > >>>>>>>>>>># Composite Recordings
> > > >>>>>>>>>>>CMP_INPUT = 1
> > > >>>>>>>>>>>CMP_PRE_REC = ('amixer sset Mic unmute cap');
> > > >>>>>>>>>>>CMP_CMD = (CONF.mencoder + ' ' +
> > > >>>>>>>>>>> 'tv:// ' +
> > > >>>>>>>>>>> '-tv driver=%s:input=%d' % (TV_DRIVER,
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>
> > > >>CMP_INPUT) +
> > > >>
> > > >>
> > > >>>>>>>>>>> ':norm=%s' % CONF.tv +
> > > >>>>>>>>>>> ':width=%d:height=%d' %
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>
> > > >>>>>(TV_REC_SIZE[0],
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>TV_REC_SIZE[1]) +
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>>> ':outfmt=%s' % TV_REC_OUTFMT +
> > > >>>>>>>>>>> ':device=%s' % TV_DEVICE +
> > > >>>>>>>>>>> VCR_AUDIO + ' ' +
> > > >>>>>>>>>>> '-ovc lavc -lavcopts ' +
> > > >>>>>>>>>>> 'vcodec=mpeg4' +
> > > >>>>>>>>>>> ':vqscale=3 ' +
> > > >>>>>>>>>>> '-oac mp3lame -lameopts ' +
> > > >>>>>>>>>>> 'br=128:cbr:mode=3 ' +
> > > >>>>>>>>>>> '-ffourcc divx ' +
> > > >>>>>>>>>>> '-endpos %(seconds)s ' +
> > > >>>>>>>>>>> '-o %(filename)s')
> > > >>>>>>>>>>>CMP_POST_REC = ('amixer sset Mic mute');
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>and then add a channel to TV_CHANNELS:
> > > >>>>>>>>>>>('composite', '01 DIGITAL', '1')
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>You also need to replace the following files:
> > > >>>>>>>>>>>src/tv/plugins/generic_record.py
> > > >>>>>>>>>>>src/helpers/recordserver.py
> > > >>>>>>>>>>>with the attached files.
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>
> > > >>http://freevohelp.com/FILES/generic_record.py
> > > >>
> > > >>
> > > >> http://freevohelp.com/FILES/recordserver.py
> > > >>
> > > >>
> > > >>>>>>>>>>>On 1/24/06, Davide dada Carboni <[EMAIL PROTECTED] >
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>
> > > >>wrote:
> > > >>
> > > >>
> > > >>>>>>>>>>>>On 1/24/06, Stian Næprud < [EMAIL PROTECTED] >
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>wrote:
> > > >>
> > > >>
> > > >>>>>>>>>>>>>I think I have posted before, with no response.... But
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>I
> > > >>
> > > >>
> > > >>>>>have
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>>>>>>struggled with this for 2 weeks now, trying different
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>>>>settings
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>found
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>>>>>in Wiki and mailling lists. So please, some gurues out
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>>>>there, help
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>me
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>>>>>with this. The audio goes to my default soundcard and
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>line
> > > >>
> > > >>
> > > >>>>>in.
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>>>>>>My card is a Hauppage WinTV GO2 and I am running
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>Fedora core
> > > >>
> > > >>
> > > >>>>>3.
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>>>>>>Installed Freevo with yum.
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>I can watch the composite input in Freevo with theese
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>>>>settings,
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>but
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>>>>>how do I record:
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>>
> > > >>>>>>>>>>>>I suspect you need some VCR_CMD with executes mencoder.
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>I have
> > > >>
> > > >>
> > > >>>>>the
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>same
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>>>>card but I use mencoder to get the stream directly from
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>the TV
> > > >>
> > > >>
> > > >>>>>In.
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>In
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>>>>your case you should find a way to instruct mencoder to
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>>>>acquire from
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>>>>>composite instead of TV.
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>--
> > > >>>>>>>>>>>>La gente vuole le manopole
> > > >>>>>>>>>>>>(Anonimo inventore)
> > > >>>>>>>>>>>>--
> > > >>>>>>>>>>>>http://people.crs4.it/dcarboni
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > >
> >>-------------------------------------------------------
> > > >>
> > > >>
> > > >>>>>>>>>>>>This SF.net email is sponsored by: Splunk Inc. Do you
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>grep
> > > >>
> > > >>
> > > >>>>>through
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>log
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>>>files
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>>for problems? Stop! Download the new AJAX search
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>engine that
> > > >>
> > > >>
> > > >>>>>makes
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>>>>>searching your log files as easy as surfing the web.
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>>>>DOWNLOAD
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>SPLUNK!
> > > >>>>>>>>
> > > >>>>>>>>
> > >
> >>http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > >>
> > > >>
> > > >>>>>_______________________________________________
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>>>>>Freevo-users mailing list
> > > >>>>>>>>>>>>[email protected]
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > > >>>>>>>>>>>>
> > >
> >>https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > >>
> > > >>
> > > >>>>>>>>>>>
> > > >>>>>>>>>>>
> > > >>>>>>>>>>--
> > > >>>>>>>>>>Stian Næprud
> > > >>>>>>>>>>Elvevegen
> > > >>>>>>>>>>2642 Kvam
> > > >>>>>>>>>>+47 95 04 82 81
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > >
> >>-------------------------------------------------------
> > > >>
> > > >>
> > > >>>>>>>>>>This SF.net email is sponsored by: Splunk Inc. Do you grep
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>through
> > > >>
> > > >>
> > > >>>>>log
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>files
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>>>for problems? Stop! Download the new AJAX search engine
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>that
> > > >>
> > > >>
> > > >>>>>makes
> > > >>>>>
> > > >>>>>
> > > >>>>>>>>>>searching your log files as easy as surfing the web.
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>DOWNLOAD
> > > >>
> > > >>
> > > >>>>>SPLUNK!
> > > >>>>>
> > > >>>>>
> > >
> >>http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > >>
> > > >>
> > > >>_______________________________________________
> > > >>
> > > >>
> > > >>>>>>>>>>Freevo-users mailing list
> > > >>>>>>>>>> [email protected]
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > > >>>>>>>>>>
> > >
> >>https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > >>
> > > >>
> > > >>>>>>>>>
> > > >>>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>>
> > > >>>>>>>--
> > > >>>>>>>Stian Næprud
> > > >>>>>>>Elvevegen
> > > >>>>>>>2642 Kvam
> > > >>>>>>>+47 95 04 82 81
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > >
> >>-------------------------------------------------------
> > > >>
> > > >>
> > > >>>>>>>This SF.net email is sponsored by: Splunk Inc. Do you grep
> through
> > > >>>>>>>
> > > >>>>>>>
> > > >>log
> > > >>
> > > >>
> > > >>>>>files
> > > >>>>>
> > > >>>>>
> > > >>>>>>>for problems? Stop! Download the new AJAX search engine that
> > > >>>>>>>
> > > >>>>>>>
> > > >>makes
> > > >>
> > > >>
> > > >>>>>>>searching your log files as easy as surfing the web. DOWNLOAD
> > > >>>>>>>
> > > >>>>>>>
> > > >>SPLUNK!
> > > >>
> > > >>
> > >
> >>http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > >>
> > > >>
> > > >>>>>>>_______________________________________________
> > > >>>>>>>Freevo-users mailing list
> > > >>>>>>> [email protected]
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>>
> > > >>
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > >>
> > > >>
> > > >>>>>>
> > > >>>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>--
> > > >>>>Stian Næprud
> > > >>>>Elvevegen
> > > >>>>2642 Kvam
> > > >>>>+47 95 04 82 81
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>--
> > > >>>Stian Næprud
> > > >>>Elvevegen
> > > >>>2642 Kvam
> > > >>>+47 95 04 82 81
> > > >>>
> > > >>>
> > >
> >>>-------------------------------------------------------
> > > >>>This SF.net email is sponsored by: Splunk Inc. Do you grep through
> log
> > > >>>
> > > >>>
> > > >>files
> > > >>
> > > >>
> > > >>>for problems? Stop! Download the new AJAX search engine that makes
> > > >>>searching your log files as easy as surfing the web. DOWNLOAD
> SPLUNK!
> > > >>>
> > > >>>
> > > >>>
> > > >>
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > >>
> > > >>
> > > >>>_______________________________________________
> > > >>>Freevo-users mailing list
> > > >>>[email protected]
> > >
> >>>https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > >>>
> > > >>>
> > > >>>
> > > >>
> > > >>
> > > >
> > > >
> > > >--
> > > >Stian Næprud
> > > >Elvevegen
> > > >2642 Kvam
> > > >+47 95 04 82 81
> > > >
> > > >
> > >
> >-------------------------------------------------------
> > > >This SF.net email is sponsored by: Splunk Inc. Do you grep through log
> files
> > > >for problems? Stop! Download the new AJAX search engine that makes
> > > >searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
> > >
> >http://sel.as-us.falkag.net/sel?cmd=k&kid3432&bid#0486&dat1642
> > > >_______________________________________________
> > > >Freevo-users mailing list
> > > >[email protected]
> > > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > This SF.net email is sponsored by: Splunk Inc. Do you grep through log
> files
> > > for problems? Stop! Download the new AJAX search engine that makes
> > > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
> > >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > > _______________________________________________
> > > Freevo-users mailing list
> > > [email protected]
> > >
> https://lists.sourceforge.net/lists/listinfo/freevo-users
> > >
> >
> >
> > --
> > Stian Næprud
> > Elvevegen
> > 2642 Kvam
> > +47 95 04 82 81
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: Splunk Inc. Do you grep through log
> files
> > for problems? Stop! Download the new AJAX search engine that makes
> > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
> >
> http://sel.as-us.falkag.net/sel?cmdlnk&kid3432&bid#0486&dat1642
> > _______________________________________________
> > Freevo-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/freevo-users
> >
>
>
--
Stian Næprud
Elvevegen
2642 Kvam
+47 95 04 82 81
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
