Paul Sijben wrote:
> I think that before this code is included in the main distribution a
> couple of loose ends need fixing:
> 
> - how to check for the number of (ivtv) capture cards without naively
> checking against the length of  VIDEO_GROUPS (input needed, is there a
> function to call for that???)

I think you would need to scan the video devices using tv.v4l2 it
queries the devices capabilities. If you can read C check the
ivtv-detect program in the ivtv-0.8.1 driver.

> - I wrote:/ I am pretty sure I broke some system that handles
> interaction between TV viewing and recording. /This is because I changed
> the name of the lockfile to deal with multiple cards. So this needs to
> be aligned with other parts of freevo that look at this lockfile.

IIRC, I changed the lockfile to use the video device name as a suffix,
but you may need to fix upsoon as this checks this device and sends a
stop to the player if the tv card's tuner is in use.

> - I think conflict resolution needs a bit more refinement
> - is there an elegant way (or even a need) to allow parallel recording
> over multiple card types?

BTTV and saa713x cards use a raw video stream, which in turn needs
encoding in real-time (The raw files are massive, 27Mb/sec). Real-time
software encoding on more than one channel would put a very high load on
the system, but I've not tried it.

Duncan


> Duncan Webb wrote:
>> Paul Sijben wrote:
>>   
>>> OK here are the 1.6 files as patched.
>>>
>>> The patch allows recording multiple shows concurrently. It assumes
>>> that all TV channels are available from the same card type. (in this
>>> case ivtv, you can make a similar patch against other record types,
>>> just patch ????_record.py).
>>>
>>> I am using VIDEO_GROUPS as follows. (note that I also assume that this
>>> is the only kind of entries there are in video groups.I simply check
>>> for the number of cards by checking the length of VIDEO_GROUPS, there
>>> must be a more elegant way to do this...)
>>>
>>> VIDEO_GROUPS = [
>>>    VideoGroup(vdev="/dev/video0",
>>>       adev=None,
>>>       input_type='tuner',
>>> #      input_num=0,
>>>       tuner_norm=CONF.tv,
>>>       tuner_chanlist=CONF.chanlist,
>>>       desc='Cable',
>>>       group_type='ivtv',
>>>       record_group=None),
>>>   VideoGroup(vdev="/dev/video1",
>>>       adev=None,
>>>       input_type='tuner',
>>> #      input_num=0,
>>>       tuner_norm=CONF.tv,
>>>       tuner_chanlist=CONF.chanlist,
>>>       desc='Cable',
>>>       group_type='ivtv',
>>>         record_group=None)
>>>    ]
>>>
>>> conflict resolution is now as follows:
>>> - are there unused capture cards, pick one of those, highest number
>>> first (as TV viewing is always done on video0)
>>> - if all are busy find a card where the show is to end now
>>> - otherwise pick an active card and use the normal conflict resolution
>>> code. (indeed this could use with some refining)
>>>
>>> Note: I am pretty sure I broke some system that handles interaction
>>> between TV viewing and recording.
>>>     
>>
>> I'm interested to get some feedback from anybody who has tried Paul's
>> changes, if some of you are using this and others want to use it then
>> I'm more than happy to add the changes into rel-1.
>>
>> Duncan


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to