On Thu, Jun 4, 2009 at 12:24 AM, Phil Raymond <tvp...@yahoo.com> wrote:
>
> I tried several combinations of local conf commands, nothing has worked
> yet.Although I did get the HDPVR device to light up blue for one second when
> it started one of the recordings I programmed, so I think I'm closeap.
> Perhaps the next version of Freevo could offer an option of recording from
> usb without a channel conf? Channels are set with the cable remote, since I'm
> recording the output of the box and I always use manual record, I don't need
> a channel conf. Anyway,here's the last local conf I used....
>
> CONFIG_VERSION = 5.27
> TV_RECORD_DIR = '/home/tvphil/Videos'
> TV_CHANNELS = ('comcast','comcast','NAusb')
> TV_DRIVER = 'v4l2'
> TV_DEVICE = 'cat /dev/video1'
> TV_INPUT = 1
> TV_REC_SIZE = (1920, 1080)
> TV_RECORD_FILE_SUFFIX = '.mpg'
> CHILDAPP_DEBUG = 1
>
What do you have for the 'VCR_CMD='? This will be the one you need to
configure to get the recording to work. I had to modify it to get a
WinTVgo card to record. The http://doc.freevo.org/AnalogueTvTypes page
should give you a could idea how to setup the VCR_CMD=. The pafe is
for analog devices, but mencoder is mencoder regardless of input
source.
Evan
------------------------------------------------------------------------------
OpenSolaris 2009.06 is a cutting edge operating system for enterprises
looking to deploy the next generation of Solaris that includes the latest
innovations from Sun and the OpenSource community. Download a copy and
enjoy capabilities such as Networking, Storage and Virtualization.
Go to: http://p.sf.net/sfu/opensolaris-get
_______________________________________________
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
