On Fri, Nov 10, 2006 at 11:19:43PM +0000, Sven Geggus wrote:
> Dear FreeWRT developers,
>
> I try to run freewrt WLAN in managed mode (no encryption yet).
>
> /etc/network/interfaces (relevant part) looks like this:
>
> auto eth1
> iface eth1 inet static
> address 10.10.10.11
> netmask 255.255.255.0
> wireless-type broadcom
> wireless-country DE
> wireless-mode sta
> wireless-ssid geggus.net
> wireless-channel 11
> wireless-security open
>
> Unfortunately this does not lead to managed mode, but Ad-Hoc mode
> instead:
>
> [EMAIL PROTECTED]:~# iwconfig eth1
> eth1 IEEE 802.11-DS ESSID:"geggus.net"
> Mode:Ad-Hoc Frequency:2.462 GHz Cell: F2:52:5B:6F:8A:92
> Tx-Power:19 dBm
> RTS thr=2347 B Fragment thr=2346 B
> Encryption key:off
Hmmh, config seems correct, on my router I get with a similar config:
eth1 IEEE 802.11-DS ESSID:"test"
Mode:Managed Frequency:2.462 GHz Tx-Power:19 dBm
RTS thr=2347 B Fragment thr=2346 B
Encryption key:off
Please do a "set -x" at the beginning of
/etc/network/if-pre-up.d/wireless-broadcom and post the output. Please
post also the output of "wl dump". Which router plattform are you using?
Seems that "wl ap 0" is not working for you.
> P.S.: "wlist eth1 scan" does show my my access-point, so WLAN is
> basically working.
wlist? I am not aware of this command. Which package?
Dirk
_______________________________________________
freewrt-developers mailing list
[email protected]
https://www.freewrt.org/lists/listinfo/freewrt-developers
