Hi Fuel-Dev, While deploying the slave nodes, we had below configuration in VCS device. Only if we have below configuration, deployment is getting successful and I can able to launch Horizon.
VCS Configuration - Access mode: - Used this configuration while deploying from Fuel UI interface TenGigabitEthernet 133/0/7 fabric isl enable fabric trunk enable switchport switchport mode access switchport access vlan 1 spanning-tree shutdown no shutdown ! interface TenGigabitEthernet 133/0/13 fabric isl enable fabric trunk enable switchport switchport mode access switchport access vlan 1 spanning-tree shutdown no shutdown ! interface TenGigabitEthernet 133/0/21 fabric isl enable fabric trunk enable switchport switchport mode access switchport access vlan 1 spanning-tree shutdown no shutdown ! Now, we are not able to ping Compute node management ip (192.168.0.2) from Controller node (192.168.0.3) and vice versa. Because of this "nova hypervisor-list" is empty. I tried configuring VCS device with above configuration (access mode) as well as below configuration (trunk mode). When we are configuring trunk mode setting in VCS, both controller and compute nodes are going away from master node (we are getting notification in Fuel UI). Not sure what is the expected configuration. Kindly let us know what should we do, so that "nova-hypervisor-list" will list compute node. I have attached diagnostic snapshot at https://www.dropbox.com/s/nf09krcx5zum371/fuel-snapshot-2014-06-26_13-19-07.tgz VCS Configuration - Trunk mode: interface TenGigabitEthernet 133/0/7 fabric isl enable fabric trunk enable switchport switchport mode trunk switchport trunk allowed vlan add 101-103 switchport trunk tag native-vlan spanning-tree shutdown no shutdown interface TenGigabitEthernet 133/0/13 fabric isl enable fabric trunk enable switchport switchport mode trunk switchport trunk allowed vlan add 101-103 switchport trunk tag native-vlan spanning-tree shutdown no shutdown interface TenGigabitEthernet 133/0/21 fabric isl enable fabric trunk enable switchport switchport mode trunk switchport trunk allowed vlan add 101-103 switchport trunk tag native-vlan spanning-tree shutdown no shutdown Thanks and Regards, Gandhi Rajan
-- Mailing list: https://launchpad.net/~fuel-dev Post to : [email protected] Unsubscribe : https://launchpad.net/~fuel-dev More help : https://help.launchpad.net/ListHelp
