Thanks Lee.
For any other newbies looking at the code I put in my examples, I've just noticed I
have a typo in my first example.
It should read
fusebox.Circuits.child = "home/child"
and not
fusebox.Circuits.child = "home.child"
John
-----Original Message-----
From: "Lee Borkman" <[EMAIL PROTECTED]>
Sent: 19 April 2002 09:47
To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
Subject: Re: Nesting circuits - does the physical path have to be a
subfolder of the home
Yes, John. The logical nesting is completely tie to the physical
nesting, although this will certainly be a hot topic for the
Standards-Committee-to-be.
LeeBB
----- Original Message -----
From: John Boyes <mailto:[EMAIL PROTECTED]>
I'm a newbie to Fusebox3 and am currently building my first app.
My question is, for settings to be inherited properly from a
"home" circuit, do child circuits have to physically be located in a
subfolder of the home circuit?
For example, I understand that the following works fine:
fusebox.Circuits.home = "home"
fusebox.Circuits.child = "home.child"
But would either of the following allow settings to be
inherited?
fusebox.Circuits.home = "home"
fusebox.Circuits.child = "child"
or
fusebox.Circuits.home = "home"
fusebox.Circuits.child = "../child"
Apologies if this has been asked before, I have scoured the
archives but couldn't find a definitive answer.
==^================================================================
This email was sent to: [email protected]
EASY UNSUBSCRIBE click here: http://topica.com/u/?bUrFMa.bV0Kx9
Or send an email to: [EMAIL PROTECTED]
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
