Stephen, I think if you could clarify a couple of things we should be able to work this out. First off, how many pages are there in a document? It sounds like there are 2 but I'm confused when you say that you are composing 25 records into stacks of 50. It sounds like you want to compose 50 records into 2 stacks of 25, in which case you would set the stack to 25 in the first position and then set the second position (either vertical or horizontal) to 2. You might want to take a look at the composition log (.msg) file to see if it says anything about the number of records not filling a stack and that the stack size has been adjusted. Also, it sounds like each document is unique but you said you're getting "copies" of each item so I'm a bit confused by that as well. If you don't want copies, you want to make sure that the "duplicate" check box is not selected. See if any of that helps and then we can take it from there. Bruce
________________________________ From: Stephen Kaiser [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 13, 2007 12:32 PM To: FusionPro Users Forum Subject: [fusionpro] Re: Buggy Composition bump... On Nov 7, 2007 1:19 AM, <[EMAIL PROTECTED]> wrote: 'm trying to impose some documents 2-up on an 11x17 sheet (duplex). I make a record with a single variable (the item number) for each document and then set the stack count in PFImposer to the quantity that I want printed. That way when I cut the sheets in half I end up with a stack of each item that I wanted. I tried to compose 25 records into stacks of 50 and I ended up with a 314 page composition. I only got 13 copies of each item before it moved onto the next two records. Also, it only makes one copy of the last record (instead of 13 like the others). I tried to double the stack count to 100 and ended up with the same results. Then I tried it with a stack count of only 5 and it worked fine except for the last record still only produced 1 copy. I tried this on two separate machines with different versions of Acrobat and it does the same thing on both. Any ideas how to fix this? Am I doing something wrong? Do I need to clarify anything? -Stephen Kaiser Quick Print Technician Bible Truth Publishers +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- FusionPro 5.0 Now Available! Variable text on a curve and soft drop-shadows for variable text LIMITED TIME upgrade offer of $299 per license for current customers: http://fusionpro.printable.com/store/upgrade New licenses available for $599 each at: http://fusionpro.printable.com/store/ All FusionPro 5.0 customers to receive FusionPro 5.1 with Adobe Acrobat 8 and InDesign CS3 support when released for FREE. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com -- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- FusionPro 5.0 Now Available! Variable text on a curve and soft drop-shadows for variable text LIMITED TIME upgrade offer of $299 per license for current customers: http://fusionpro.printable.com/store/upgrade New licenses available for $599 each at: http://fusionpro.printable.com/store/ All FusionPro 5.0 customers to receive FusionPro 5.1 with Adobe Acrobat 8 and InDesign CS3 support when released for FREE. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
