I am trying to print out box labels. I can fit 1800 in a box. The labels are 2.63" wide x 1" tall. I am imposing them 30-up on an 8 1/2x11 sheet.
I have to print out box labels based on the quantities. I just need it to grab the data and put it into a field. Anything over 1800 the remainder will go into the next label. If I have a quantity of 2000, I need 1 label to say 1800 and the next label to say 200. All I am trying to do is just labels for boxes. If it is 500 then 500...then if after that there is 4000 the next 3 labels would say (1st label) 1800, (2nd label) 1800 and (3rd label) 400. The remainder is anything over 1800. so if there is 1801 one label should say 1800 and the other should say 1. If the field says 25 then the label should say 25. Also, is there a way to grab the field name and place that also? Example: Samples, Officials, Test. Example list: officials 500 = 1 label for 500 4000 = 2 labels for 1800 and 1 for 400 1801 = 1 label for 1800 and 1 for 1 25 = 1 label for 25 Example Label Label #1: Precinct ID: «precinct id» PPP: «precinct polling place» Ballot Style: «ballot style» «labeltest2 Rule»1800 Officials Example Label Label #2: Precinct ID: «precinct id» PPP: «precinct polling place» Ballot Style: «ballot style» «labeltest2 Rule»200 Officials -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
