To aid our production staff we need to start printing the page info on each sheet. This will allow us to quickly reprint pages that get damaged or need revisions after the initial run.
The problem we're having is the location of the info is being cut off by the gripper of our Indigo or, when rotated, the printalbe area of the page. Setting up the page rotated 90 degrees does not help, the info still is too close to the edge. We're running 8.5x5.5in VDP cards 4 up with 1/16 bleeds on all edges. Any thoughts or suggestions would be greatly appreciated. Thank you everyone! Mike +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- Calling all FP Web Users! Do you have a question or lots of knowledge to share about FusionPro Web? If so, join our Printable Web to Print Users' Forum today! Send email to [EMAIL PROTECTED] to find out how! +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- -- Users of FusionPro Desktop have unlimited free email support. Contact Printable Support at [EMAIL PROTECTED] -- View FusionPro Knowledge Base, FusionPro Samples at www.printable.com/vdp/desktop.htm -- You are currently subscribed to fusionpro as: [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] -- -- Note: All e-mail sent to or from this address will be received or otherwise recorded by the e-mail recipients of this forum. It is subject to archival, monitoring or review by, and/or disclosure to someone other than the recipient. Our privacy policy is posted on www.printplanet.com --
