I started out with trying this on 6.2 with the 2.2.13 kernel as they
recommend that kernel and says it wont work with anything newer.
On a dual pentium III 550, with 512 megs of ram, an intel ether express
pro onboard, and dual eexpress off board, scsi on board but not enabled..
First, they install fw-1 with S01 as the rc3 init.. Well duh you can't
load it before the network, so you have to hand move this to S15.
With an SMP kernel, and without.. the machine kernel panics after a
few minutes if the firewall module is loaded.
The logging is poor, they have barely ANY documentation on it, and after
trying it on redhat 6.1 and redhat 6.0, and failing on both, I've decided
that this beta is terrible.
Everything you have all said is bad as well, doesn't sound like anyone can
get it running. What are they thinking?
Erik Parker
[EMAIL PROTECTED]
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
