Thanks for the correction.
I didn't bother to check that,
I thought he meant he'd been
assigned 8 addresses from his ISP,
so I just assumed it was a whole subnet....
Cheers,
Anders :)
> -----Original Message-----
> From: Didier Arenzana [mailto:[EMAIL PROTECTED]]
> Sent: 30. august 2000 18:40
> To: Reed Mohn, Anders; 'jayant nashikkar'
> Cc: Fw-1-Mailinglist (E-mail)
> Subject: RE: [FW1] subnetting problem for class c ip
>
>
> Just a remark below...
>
> --- "Reed Mohn, Anders" <[EMAIL PROTECTED]> a �crit�:
> >
> > I'm not sure what you mean by "sequential IPs" but I assume
> > you want to split your addresses between the internal LAN adn the
> > DMZ.
> > [...]
> > You have only 8 addresses, i.e. your network is
> > 202.54.44.30, with netmask 255.255.255.248
> > Adresses .30 and .37, cannot be used
> > (.37 is your broadcast address)
>
> This is not possible. If your netmask is 255.255.255.248, yout network
> address can't be 202.254.44.30, because the result of the binary
> operation '30 and 248' is 24. If your network is 202.254.44.24 with a
> netmask of 255.255.255.248, your broadcast address is 202.254.44.31.
> The smallest network that could contain host addresses from 30 to 37
> would be 202.254.44.0 with a netmask of 255.255.255.192 (a 62 hosts
> network)
>
> > [...]
> Regards,
>
> Didier.
>
>
> ___________________________________________________________
> Do You Yahoo!?
> Achetez, vendez! � votre prix! Sur http://encheres.yahoo.fr
>
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
