On Nov 7, 2008, at 9:17 PM, Brian Troisi wrote:
> > Hello! I am having problems with my Pismo. I tried to add ram to the > lower slot, and I put the processor back in, and it will not power on. > I took out the new RAM card and still no avail. Processor card seems > fully seated, no hard drive spins up. The PRAM battery is > disconnected, so that wouldn't matter. Any ideas? Thank you very much! Open it back up, and make sure you push *really* hard on the processor card, until you hear it POP. Then you'll know it's completely seated. This is a common mistake people make when adding or changing Pismo memory. And yes, I did it too. Brian --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to Low End Mac's G-Books list, a group for those using G3 iBooks and PowerBooks (we run a separate list for G4 'Books). The list FAQ is at http://lowendmac.com/lists/g-books.html and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g-books?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
