Brian Troisi wrote: > Hello! I am having problems with my Pismo. I tried to add ram to the > lower slot, and I put the processor back in, and it will not power on. > I took out the new RAM card and still no avail. Processor card seems > fully seated, no hard drive spins up. The PRAM battery is > disconnected, so that wouldn't matter. Any ideas? Thank you very much!
Odds are the processor card isn't seated fully. It feels like you are going to break it plugging it in fully, really, that is normal. Was the card easier to remove the second time versus when you pulled it initially? Push harder. -- Clark Martin Redwood City, CA, USA Macintosh / Internet Consulting "I'm a designated driver on the Information Super Highway" --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to Low End Mac's G-Books list, a group for those using G3 iBooks and PowerBooks (we run a separate list for G4 'Books). The list FAQ is at http://lowendmac.com/lists/g-books.html and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g-books?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
