On Jun 15, 2011, at 7:48 PM, VicLevine wrote: > My Pismo was running normally until I changed the hard drive and lower > memory card. Everything seemed intact but when I tried to start the > machine, I got nothing—no chime, no action at all. The only thing I > noticed after several minutes was that the machine, which was plugged > into the AC, was getting warm, so it's obvious current is being pumped > into the machine, yet it will not show any life on the screen at all.
Changing the lower slot means you pulled the CPU card. It's very command to NOT press the CPU card in sufficiently hard enough to plug it in properly. You typically have to push it hard enough that you FEEL like you are going to break something. So try opening it up again and reseat the CPU card. Clark Martin Redwood City, CA, USA Macintosh / Internet Consulting "I'm a designated driver on the Information Super Highway" -- You received this message because you are a member of G-Books, a group for those using G3 iBooks and PowerBooks (we run a separate list for G4 'Books). The list FAQ is at http://lowendmac.com/lists/g-books.html and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g-books Support for older Macs: http://lowendmac.com/services/
