Huh!? What screw's that? I dont think I'm following that. I am trying to take off the heat sink covering the RAM slots . As far as I know that's the only thing getting in the way. That's what I had to remove when I installed RAM. It's the called the heatshield isn't it? Something I'm overlooking here? That's what I see to remove from Apple's how-to videos.
On Thursday, October 10, 2002, at 10:20 PM, Obi-Wan wrote: >> > > STOP! You are not supposed to remove the 2 screws on the heatsink > (located > near your Ram slot on the top of your processor card). You are > supposed to > remove the single screw on the Heat exchanger (follow that arm away > from the > Processor card to the left and find it) and then lift the processor > and heat > sink out all as one unit. If you loosened those screws and they are > not > coming out, it is because the Thermal Transfer pad and Thermal Grease > are > holding it there. Screw them back in NOW! > > Of course I didn't tell you any of this....... Contact me offlist if > you > need further assistance. -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
