I had a problem receiving the digests for a day, so I've had to go to
the archives and cut and paste to reply to the responses to my original
post.
Hal wrote:
>>I'm using a Laserwriter 360 with my Pismo and my G4 Cube without
problems. I picked up a Dayna EtherPrint Adapter (connects
localtalk
devices to an ethernet network) on eBay for about $25 and print
to my
360 via Airport.<<
I'm not networked nor do I have AirPort. I'm looking for the
simplest and least expensive approach. I am definitely not technically
inclined. A screwdriver in my hand is a weapon of mass destruction. :
>)
>>I've used the Orange Micro firewire/scsi adapter with mixed
luck. I
finally gave in and got rid of my scsi peripherals a while back.
The
firewire/scsi voodoo thing was too much of a hassle.<<
You are the second person that has told me about problems with
the Orange adapter. Getting rid of my film scanner is not an option. It
would cost me over $1800 to replace the scanner. What about USB/SCSI
adapters?
--
Regards,
Les
--
G-Books is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- Check our web site for refurbished PowerBooks | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-Books list info: <http://lowendmac.com/lists/g-books.html>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>
---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------
