Obi-Wan wrote: > It's not your Pismo. There is no incompatibility with a drive in an > enclosure through a FW bridge. Just plug the drive in to the AC. Plug the > FW cable into the Pismo, and open Drive setup and format the drive. IT > should work fine. The Jumper in all FW drives should be set to master.
I had a problem with an external FW drive in a Rev1 B&W; it wouldn't work until I upgraded the B&W to OSX (which kinda sucked rocks, since the reason I was attaching it was to back the system up before upgrading it to OSX...:-/ Dunno if this has any bearing on the issue with the Pismo, but there are some FW drives that are not entirely compatible... -- Bruce Johnson University of Arizona College of Pharmacy Information Technology Group Institutions do not have opinions, merely customs -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
