Re; Im sorry Im not familiar with the lombard,a pcmica card would be my
first guess, is your machine compatale with an airport card? possably a usb
pcmica card and then a usb wireless connect? I had same problem with a
tower,I got around it with a pci addin card, it worked,sort-of but made the
whole machine act flaky.I wish you well.



on 1/26/03 12:45 AM, Randy Worrall at [EMAIL PROTECTED] wrote:

> I have a Lombard recently upgraded to OS X that the ethernet port stopped
> working on. A trip to my Apple authorized repair shop confirmed a bad ethernet
> port. The replacement of the motherboard is apparently the only way to repair
> this problem($570+ for an estimate). All OS 9 and OS X software has been
> re-installed during the troubleshooting with no effect.  I've tried all the
> battery pulling and resetting that seemed to work in a previous posting.
> 
> I am curious if a PCMCIA 10/100 card like FriendlyNET will work in OS X on the
> Lombard. I see the availability of Beta drivers on the website, but I read a
> few digest reports of problems with this setup. Not an elegant solution, but
> better than the phone line at 56k.
> 
> Thanks for any answers/advice.
> 
> Randy


-- 
G-Books is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
 -- Check our web site for refurbished PowerBooks  |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

G-Books list info:      <http://lowendmac.com/lists/g-books.html>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>



---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------


Reply via email to