Did you try with just a plain Ethernet cable? I don't know which models were included, but I know some (all?) iBooks had an auto-configuration thingo, where a cross-over cable was not needed... The ibook would sense a computer to computer network, and go from there.
On 21/8/03 10:22 PM, "Andrew Main" <[EMAIL PROTECTED]> wrote: > I couldn't get a (clamshell) iBook to connect via ethernet, using a > crossover cable, to my PowerBook. I tried another computer (PB 1400) > and it worked, so I know the cable and setup are good. AppleTalk is > on, and routed to built-in ethernet. So I guess the ethernet port > must be bad, though visually it looks okay (no bent pins). Then I > tried another iBook, and had the same problem, so now I'm wondering > if there's some trick to setting up ethernet on an iBook? Or is there > any other way to test the port? > > Andrew Main -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
