i attached a new fire wire Toshiba 30 GB hard disk to my Pismo 400 by
placing it in a case firewire case from SITECOM.  art.no CN-600.
It didn't show up at the desk top. After taking the firewire plug in and
out many times after eachother, it showed up. I formatted it and installed
system 9. Fine.
Then i switched the disk with the original internal disk and started up.
Fine.
Then i connected the old disk externally (by placing it in the sitecom
case) to the machine and it stalled. it was stuck.
Now i switched the disks back and forth  and in and out but it won't start
up at all anymore. Not even from the start up CD.
it keeps looking for a system wich it doesn't seem to find anymore.
On each hard disk is a system folder.
Before it totally refused to work i ran over it with all possible repair
and check applications and they repaired quite al lot, but now...
>
What to do? Who has any sugestions!
>
Thanx, sakshin

-- 
G-Books is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
 -- Check our web site for refurbished PowerBooks  |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

G-Books list info:      <http://lowendmac.com/lists/g-books.html>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>



---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------


Reply via email to