On 10/26/03 4:19 AM, "kaldav" <[EMAIL PROTECTED]> Spew into the Cybertrough:
> Hello, > I have a few questions about an original G3 (same form as a 3400). > 1. I wish to replace the latch and have the part. I found pictures to > assist with hard drive replacement at <www.genchan.com> about the > 3400, however there is nothing about the screen assembly. Is there a > website giving instructions for taking apart the screen? Not that I am aware of. > 2. I want to put into the Kanga a hard drive from a 5300. That hard > drive metal cage has a plastic piece separating the disk from the > metal cage and a metal foil type of insulator. However, there is no > plastic and no metal foil separation in the Kanga. Is either one > needed to prevent shorting out? It's just EMI shielding. They are interchangeable. > 3. Is the screen for the original G3 exactly the same as for the 3400 > or did Apple put in slightly better components in the Kanga but in > the same size screen? Same exact display module. -- Kyle H. Hansen "It's Always darkest... right before it gets totally black." -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
