Well, it is early in the morning and I may be confused but...
My base station is one of the older ones (only one ethernet port and one modem port). Did you configure the base station before connecting it to the router? If not, connect an ethernet cable directly from the base station to the Pismo. Open Airport Admin Utility on the Pismo. Open Configure. Click the Network tab. Disable "Enable DHCP server on Ethernet." Enable "Enable Airport to Ethernet Bridging." Quit Airport Admin Utility. Disconnect the cable from the Pismo to the base station. Reconnect the base station to the router. See if the Pismo can now connect.
I tried the above and in OS 9.2.2 with the latest software for the single ether net connector graphite software loaded airport under networks, enable ether net bridging was not available choice, the enable DHCP was there and I unchecked it but no other options or screens opened.. The router is working, that's good, but no wireless.
-- G-Books is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
