I'm trying to get a Beige G3 to run on 9.2 and failing. If I try to boot from the 9.2 install CD I see the network extension load and then I get a white box that looks like the built in debugger but without a prompt. Boot does not continue. I was able to boot from and install 9.0, but as soon as I updated it to 9.2.1 it failed to boot from the hard drive with the same white box. If I try to boot with extensions off I get an address error in the same spot.
This Beige G3 has 96 megs of ram, a Zip 100, and a 4 gig hard drive. I don't know what speed it is or if it is a revision A or B. I also noticed that it produces no sound from the speaker or headphone jack even after a pram reset. Oddly, OS X (10.1) installes and runs fine! I've tried replacing the ram, unplugging the Zip, Pram reset, and searching the archive for this list. Any ideas on what else I can try? Thanks, -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
