could someone with a B&W and a zip look inside their case and see how their jumper is set for me < at your convience >
thank you Ralph on 10/16/02 5:26 PM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote: > > In a message dated 10/16/02 12:37:47 PM, [EMAIL PROTECTED] writes: > > << > ... I could be wrong that a jumper spanning two positions is "inactive", but > it definitely 0should not mimic the Master setting, right? The drive is the > only device on the bus, and is on the end connector of the ribbon cable. >>> > > Every drive manufacturer has his own ideas of how to specify Master/Slave. > > And, it appears that *some* host adapters will accept a Slave-only bus, > although most will not. -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
