The jumper on the Zip?

It should be on the same cable as the internal CD or DVD drive. 
Normally, the CD would be master and the Zip slave, though the reverse 
should work. Where it is on the cable is irrelevant.

On Wednesday, October 16, 2002, at 03:05  PM, 
<[EMAIL PROTECTED]> wrote:

> could someone with a B&W and a zip look inside their case and see how 
> their
> jumper is set for me < at your convience >
>
> thank you
> Ralph
>
> on 10/16/02 5:26 PM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote:
>
>>
>> In a message dated 10/16/02 12:37:47 PM, [EMAIL PROTECTED] writes:
>>
>> <<
>> ... I could be wrong that a jumper spanning two positions is 
>> "inactive", but
>> it definitely 0should not mimic the Master setting, right? The drive 
>> is the
>> only device on the bus, and is on the end connector of the ribbon 
>> cable.
>>>>
>>
>> Every drive manufacturer has his own ideas of how to specify 
>> Master/Slave.
>>
>> And, it appears that *some* host adapters will accept a Slave-only 
>> bus,
>> although most will not.


-- 
G-List is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com | Refurbished Drives |
 -- We have Apple Refurbished Monitors in stock!  |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

G-List list info:       <http://lowendmac.com/lists/g-list.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com

Reply via email to