on 12/1/02 6:19 PM, Mitch Hogg at [EMAIL PROTECTED] wrote: > If you're sure the Appletalk control panels weren't just moved or disabled, > you'll need to either install them from a system software installer or from > another machine. If you let the list know what system(s) the 6400s are > running, I'm sure we could come up with the appropriate Appletalk panels. > > The 6400, as far as I know, didn't ship with built-in ethernet, and I worry > that any machine without an Appletalk control panel may also be lacking > Appletalking hardware. If you do have to buy ethernet cards for the > machines, I highly recommend going with the PCI option rather than the Comm > II. > > > Mitch. > > > On 12/1/02 6:04 PM, " George Deming" <[EMAIL PROTECTED]> wrote: > >> have two performa 6400/200 i just acquired neither have apple talk control >> panels. wish to hookup on cable modem through liknsys hub.g3 beige already >> humming on net through hub. any ideas. thanks tuck230 >> > performa 6400/200 running 8.6 with pci card installed also performa 6400/200 running 7.5.3 with farallon comm slot II card also G3 running 9.2.2 internet ready working fine . all to linksys hub port#EFAHO5W Thanks tuck
-- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
