> On Saturday, March 15, 2003, at 04:32 AM, Richard Starr wrote: > > --- You wrote: > Could you please advise me where on the MoBo is the connector for the > other > IDE Bus, please? My manual doesn't say. > (G3 300/MT, Rev 2 ROM) > --- end of quote --- > The ribbon cable to the original hard drive should have a second > connector on it > for a slave drive. That's the drive ata bus. The ribbon connector > for the cd > drive should have a second connector on it too. That's the second > bus. There's > also a loose ribbon connector (on my machine at least) for an internal > scsi > drive, should you care to install one. It has a different number of > pins than > an ATA ribbon connector. > > Rich > > >
I believe, what he is actually asking is, a reference to the connectors on the MOBO. There are three connectors on the MOBO for drives and are in the right rear quadrant. The wider one is for SCSI and the other two are IDE/ ATA. Andy3 -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
