On 9/5/03 10:45 AM, "Ian Fleming" <[EMAIL PROTECTED]> wrote:
> I am running OS9.2.2 on a Beige 266 G3,I currently have a USB1 card > in the PCI slots.Will the drivers for PCI USB support the higher > speeds of USB2,or do the cards just run at USB1 speed? > Ian Ian, the only way to see USB 2.0 speeds is, to install a USB 2.0 card AND Mac OS X. In Classic, a USB 2.0 card will only work at USB 1.0 speeds. It wouldn't hurt to have a USB 2.0 card already sitting in the PCI slot, if you're planning to use OS X anytime in the future. I currently have a Sonnet Tango USB 2.0/FireWire (400) combo card installed, but am only using OS 9.1 as my OS. Even when I had OS X 10.2 installed, several months ago, my peripherals are still USB 1.0. Matt in Indiana -- "FrankenMac" MT; 333MHz G3; 768MB RAM; 30GB & 20GB HDs; zip 750; 8x4x32x CD-RW; Sonnet Tango USB/FireWire; M-Audio Audiophile 2496; ATI Radeon 7000 -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
