On Wednesday, October 8, 2003, at 07:01 AM, Len Gerstel wrote:
On Wednesday, October 8, 2003, at 01:12 AM, Mike Barnes wrote:
Can someone give me a quick idea of how to tweak the Beige motherboard's jumpers to get the best performance out of this? I'd like to get as close to the 350MHz rating as I can, but I have no idea how stable the various high bus speeds are likely to be. I'd hate to sell off a slightly dodgy machine to anyone.
http://eshop.macsales.com/Tech/Load_Page.cfm?page=beigejumpers.html
Just play around with the settings. From reports I have heard,
I have not just heard, but have a BGE 233 Rev. A computer that I made several changes to. First, I changed the Rev. A ROM to a Rev. C rom so that I could use Slave ATA drives . I also dropped in a 400 Mhz. Ziff processor from a B&W that was upgraded to a G4. I clocked it to 414 Mhz and it has ran that way for over 2 years now with zero problems. I also maxed out the RAM to 768 MB and put in two 60 GB Maxtor drives and a Sony Atapi CD-rw drive. It has run on all versions of OSX all the way up to and including 10.2.8 presently with no problems. ( I might add that I did wait to install 10.2.8, until it had been corrected first. )
Andy3
-- G-List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
