> In a message dated 11/30/03 5:56:06 AM, [EMAIL PROTECTED] writes: > > >Bought on Ebay a Ultra ATA 133 Acard 6280M. > > > >Installed it in my G3 DT 266 with a G4 466 upgrade, Apple Systemprofiler > >shows the card as SCSI Card and also the drive connected, the drive > >don't show on the desktop and in the SCSI Probe it shows as not mounted, > >if I try to mount the drive I get the message: no driver found. > > > >Start up from a drive connected to the card is not working either. > ................................ > Drives are seen as scsi when connected to IDE controller cards. > Any existing IDE drive has to be formatted after it's attached > to the Acard in order to be seen. You can use Apple Drive Setup. >
............................. Hi again, Thanks for the info, found out meanwhile that in OSX the drive is seen on the desktop without formatting it., later I formatted that drive in OS 9.1 and it shows now also, have a 13 gig drive with all my work on it, I don't want to format, is there no other way to get this drive going with the card in OS 9.1? Franz Bangkok -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
