> Got a G3 B/W, I upgraded it with a G4/450 ZIF. > > The G3/350 ZIF I took out from the B/W I tried it in my G3/266 DT, it > started up normal, it shows the 1 MB backside cache, but the speed is > still 266 mhz. > > Do I have to change the jumper settings that it will run at 350 mhz? > Hi all,
Thanks for your advise (Martin) and all others, found this page in LEM: http://www.bekkoame.ne.jp/~t-imai/g3ae1.html I changed the jumpers for the CPU clock and it runs now with 366 MHz I have not changed the BUS clock, it still runs at 66 MHz. The temperature for the CPU is 35 C, same like before with the 266 CPU. I think it would be possible to overclock the BUS that it would run with 400 MHz. MacBench 4 gave me with the 266 CPU 831, with the 366 CPU settings I get 1115. My B/W with the G4/466 gets a 1420 Thanks again, Franz Bangkok To Phil Wong: On my beige G3 I was not able to install OS 10.2, I could install OS 10.1.2 and upgrade to 10.1.4, OS 10.1.5 didn't work anymore, but I hear that others could run 10.2 -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
