On Mon, 23 Feb 2004 09:10:34 -0500, G-List wrote: > > With me G3/300 server (Rev 2) I'm trying to make a Lite-On CDRW to > work.. When I set it to master alone on one of the two EIDE channels it will > boot from a cd, with the other two hd's set as slaves. However, it will not > boot to OS ( 9.2.1) on it's own.. Any ideas?
Make sure if you have the Lite-On as the only device on the channel you have the jumper either removed or in the neutral position. The Master/Slave jumper settings are only used if you indeed have a master and a slave device on the same channel. bill -- \/\/i||[EMAIL PROTECTED] ()\/e -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
