Background: I have a Beige G3 desktop with the following specs:
Rev 2 ROM 512 MB RAM Sonnet Trio Tempo 120 GB Maxtor IDE HD on the Sonnet card OS 9.2.2 and OS X 10.3.3 in separate partitions and using Xpostfacto Flashed Sapphire 64 MB Radeon 7000 Linksys PCI wireless card that functions as an airport card Problem: I installed one of the OWC $149 Mercury ZIF CPU upgrades into today and then installed Power Logic's CPU director 1.4 to control the L2 cache. I jumpered the board for 500 MHz CPU @66 MHz Bus. I set the L2 at 2:1 per the OWC website and used the default for Speculative Access which was on. Other than setting the L2 Cache I didn't make any other changes. I closed the app and rebooted. Now the system doesn't come up. I can get into OS 9. Is there a way to deactivate CPU Director from within 9? Any ideas are greatly appreciated. Regards, Thomas -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
