> Most likely the new drive isn't properly connected, a cable has come > lose somewhere else or it's a master/slave issue with another drive on > the same IDE bus. > > I have had one Beige MT that didn't want to boot with an IDE drive > attached to the IDE cable by itself when the drive was jumpered for > Master. I had to remove the jumper and have nothing set on the drive. > > Then it booted. I don't know if this was a rom issue, a drive issue or > what. If it still doesn't show, and it's by itself on the bus, try > that. > > -- > Bruce Johnson
Western Digital IDE drives want to be un-jumpered (with regard to the Master/Slave jumper pair), not Master, when they are alone on an IDE bus. I have 2 Caviars that are like that. Unlike most IDE hard drives. It's just a WD thing. -- Bill Art page: <http://geocities.com/[EMAIL PROTECTED]> -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
