On Aug 28, 2008, at 1:15 AM, [EMAIL PROTECTED] wrote: > I am not familiar with the "NetBoot for Mac OS 9" you provided a link > for - can I use that to boot from and run the firmware updater?
Yes. Make sure the partition or HD has the OS 9 drivers on it. If you install the NetBoot version onto a separate partition or HD it should boot. If you install it onto the same partition as you have your Tiger, it MAY? boot, but on some Macs there is a requirement that the OS 9 MUST be installed PRIOR to OS X, and in this case, that'd be impossible. Also, you MAY? be able to run the firmware updater from Classic, but on the other hand you might need to be booted in OS 9, which would always be the preferred method. Also, the updater may give a warning in 9.2.2 but you can ignore any warning, it should run in 9.2.2 the same as 9.1. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
