Thanks to all who responded. I asked the same question as I posted here of Sonnet Support and they responded that there is indeed a firmware updater that runs under OS X - it's right there on the CD that shipped with the processor upgrade but is not mentioned in the instructions!
Thanks again On Aug 28, 11:44 pm, Charles Davis <[EMAIL PROTECTED]> wrote: > I remember there being a 'Firmware Update Package' for use with OSX. > I know it existed ---- I used it -- I may even have a copy of it yet. > > Check Apple's Downloads --- it should still be there. > > Chuck D. > > On Aug 28, 2008, at 1:26 AM, Kris Tilford wrote: > > > > > > > On Aug 27, 2008, at 10:43 PM, [EMAIL PROTECTED] wrote: > > >> I have a PowerMac G4 Ethernet (400MHz) that I want to put a Sonnet > >> processor upgrade into, but the upgrade requires an update to the > >> firmware. Trouble is, I am running 10.4.11 on the G4 and the firmware > >> updater only runs under OS 9 - for which I do not have disks. Is is > >> possible to update the firmware without having to go buy the OS 9 > >> install CD? > > > You should already be running the correct 4.2.8 firmware - I thought > > the Tiger installer checks for this before installation unless you > > transferred a previously installed System or cloned a system. If not, > > you'll need to install a 9.x OS to run the updater from. The easiest > > way would be to carve out a new small partition or add a 2nd HD to > > your PowerMac, being certain to format it with the OS 9 drivers. Then > > you can boot your 10.4.11 OS and install OS 9.2.2 onto the partition > > or HD. You may also be able to install 9.2.2 directly onto your > > 10.4.11 partition or HD, but sometimes these secondary installations > > can't boot, they're restricted to Classic emulation only. My > > understanding is that on some Mac models that are capable of dual > > booting, the OS 9.x System needs to be installed first for it to be > > bootable. Others have reported that OS 9.x systems that are installed > > after the OS X are good for Classic only. I don't know if the firmware > > updater can be run from Classic, but I suspect not, however you may > > want to try? > > > You can download OS 9.2.2 from here: > > <http://docs.info.apple.com/article.html?artnum=120243#English> > > > After you install it, be sure to go the the System folder>Extensions > > folder and remove the two "Netboot" extensions before trying to use > > this system. > > > After upgrading the firmware you can trash the entire OS 9 stuff, you > > should be good to go. > > > Link to firmware updater: > > <http://docs.info.apple.com/article.html?artnum=120068#English>- Hide > > quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
