On 9/20/08 5:00 PM, glueski of [EMAIL PROTECTED] sent > > So I am parting out my AGP Sawtooth and I can't for the life of me > figure out how to get the power supply out! > Can someone help with photo of some kind. > I think everything else is out of the case. > thanks! Laura >
Hi Laura, Easy enough- getting the cables freed up is the hardest part. There are four screws in the back end that will require a key wrench (the same size that you use to take the handles and feet screws off), and one case screw inside that bolts the PSU bracket to the chassis shelf (uses one of the stock Philips-head case screws). Release all five of these and work out the freed-up PSU (bottom first, then the top once it's cleared from its compartment) and the wiring will be easier to snake out. HTH, Best regards, Dana --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
