On Sep 21, 2008, at 5:54 PM, Dana Collins wrote:
> > On 9/20/08 5:00 PM, glueski of [EMAIL PROTECTED] sent > >> >> So I am parting out my AGP Sawtooth and I can't for the life of me >> figure out how to get the power supply out! >> Can someone help with photo of some kind. >> I think everything else is out of the case. >> thanks! Laura >> > > Hi Laura, > Easy enough- getting the cables freed up is the hardest part. There > are four > screws in the back end that will require a key wrench (the same size > that > you use to take the handles and feet screws off), and one case screw > inside > that bolts the PSU bracket to the chassis shelf (uses one of the stock > Philips-head case screws). Release all five of these and work out the > freed-up PSU (bottom first, then the top once it's cleared from its > compartment) and the wiring will be easier to snake out. > HTH, > Best regards, > Dana Just to add to Dana's comments, it is a lot easier to get all of the wiring out if you remove the fan housing. It should just be a couple of phillips head screws to take it out. Just a message from Doug... --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
