On Oct 4, 2008, at 6:50 PM, PeterH wrote:
> > > On Oct 4, 2008, at 3:13 PM, glen wrote: > >> Also be sure you have upgraded to to proper firmware -- 4.2.8 iirc, >> I'm not at my DA now so I can't check the exact version. This >> should be documented in the installation manual > > 4.2.8f1 is the highest level. Okay, just booted up the system and I have everything ready for the new CPU. Firmware is at the recommended level (4.2.8f1) and the 120 Gb drive has been installed, but not yet setup. It seems the recommended install is on a clean drive, so that is what I will do. Other than 9.22 on the 80 Gb drive, I really have nothing there I need to save. I suppose I can just use CCC to copy over the 9.22 system to the new drive after Leopard has been installed. Hopefully by this time next weekend I will be using the newly upgraded system, at least that is the plan. Just a message from Doug... --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
