On Dec 26, 2008, at 1:17 AM, cheryl wrote: > The keyboard, mouse and monitor are working fine with the G3 and they > are all plugged in to my MonsterPower surge protector. I do notice > that the light for the ground is on but the protection light is not. > > Where is the reset button?
I'm assuming you mean the reset button for the MonsterPower surge protector? Since the "protection" light isn't on, it sounds like the surge protector may have tripped? Reset the MonstorPower strip if you can find a reset button, and then test it. If you can't find a reset on the surge strip, try starting the PowerMac without the surge protector by plugging it directly into the wall socket? If you mean the reset on the PowerMac, then the Cuda reset button is located to the right of the PRAM battery. Try this also. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
