In looking at my chips in the slots with the QS's bay open facing me, there are three slots, one in the rearish, one middle, and one in the front.
Originally I put the new OWC 512MB chip in the front, yanking a 128MB chip that was there. Now I have the first OWC in the center slot, removing a 256MB chip. Second OWC 512MB chip in the the front slot. I look in System Profiler and this is what it sez I have: DIMM0/J21 - 512MB SDRAM - PC100-322S - Status OK DIMM0/J22 - 512MB SDRAM - PC100-322S - Status OK DIMM0/J23 - 512MB SDRAM - PC133-333 - Status OK Originally I wondered was it that I'd ordered the wrong chip, taking the J23 as the new one. But I looked at my receipt and the chip it seemed right. I think the J23 is actually an old one. I know it's not kosher to mix types. Any clues? Anne Keller Smith Down to Earth Web Design G4 Quicksilver 733mHz Tower 896 MB RAM, 40 GB hard drive, OS 10.4.11 Intel iMac 2.4gHz Core 2 Duo 1GB RAM, 250GB Hard Drive, OS 10.5.5 mailto:[email protected] http://www.downtoearthweb.com --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
