On Apr 9, 2009, at 4:45 PM, Wendell Mendell wrote:
> > I have two hard disks in the G4, and my system is on Device 2. > Target mode only mounts Device 1 on the Desktop of the Mini. I can > switch the hard disks so that my system is on Device 1. > Unfortunately, I cannot remember if there are jumper issues on these > IDE hard disks. Are there and what do I do? Maybe. unplug drive 1 and plug that end of the cable into drive 2. If the drives were set to Cable Select it will work. If it doesn't you need to set the jumper on drive 2 to Master. I'm pretty sure that Migration Assistant will work just fine from a disk image. -- Bruce Johnson University of Arizona College of Pharmacy Information Technology Group Institutions do not have opinions, merely customs --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
