Wendell Mendell wrote: > I posted earlier about migrating user accounts from my G4 Sawtooth, > running 10.4.11 to my new Mini running Leopard. I solved my first > problem by buying a 800/400 Firewire cable and now can bring up the > Sawtooth in target mode. However.... > > I have two hard disks in the G4, and my system is on Device 2. > Target mode only mounts Device 1 on the Desktop of the Mini. I can > switch the hard disks so that my system is on Device 1. > Unfortunately, I cannot remember if there are jumper issues on these > IDE hard disks. Are there and what do I do?
Just unplug the IDE cable to the drive that is appearing in Target Disk Mode. It should fall back to the other drive. This is a bit strange, I'm pretty sure I've used TDM in a Sawtooth and was able to see all the drives in it. But that might have been the HD and CD, I don't recall the details of it. -- Clark Martin Redwood City, CA, USA Macintosh / Internet Consulting "I'm a designated driver on the Information Super Highway" --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
