So what would I need to purchase to make my 533mhz a dual 800mhz or dual
1000mhz?

On Sat, Jun 20, 2009 at 6:03 PM, PeterH <peterh5...@rattlebrain.com> wrote:

>
>
> On Jun 20, 2009, at 3:31 PM, Matthew Burks wrote:
>
> > A couple of years back I was in contact with a guy on this forum or
> > another Mac forum who said that you could put a dual 933mhz CPU board
> > into a G4 Digital Audio. Anyone know anything about that?
>
> Apple made two fast dual processor boards which are usable on Digital
> Audios: dual 800 MHz (QS 2001) and dual 1.0 GHz (QS 2002). Both of
> these required a special power cable adapter.
>
> Apple also made a slow dual processor board for a Digital Audio: dual
> 533 MHz (DA). This did not require any power adapter.
>
> I can see no way that a dual 533 could be run at 933.
>
> It is theoretically possible to "down-clock" an 1000 or overclock an
> 800.
>
> However, although the dual 800 and the dual 1000 processors were made
> using the very same "raw" board, there are major differences between
> the dual 800 and the dual 1000.
>
> The components which are apparently missing on a dual 800 are present
> on a dual 1000, and the components which are apparently missing on a
> dual 1000 are present on a dual 800.
>
> In this way, Apple make it impossible to convert a dual 800 to a dual
> 1000 (or any frequency above 800), or to convert a dual 1000 to a
> dual 800 (or any frequency below 1000).
>
>
>
> >
>

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a 
group for those using G3, G4, and G5 desktop Macs - with a particular focus on 
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
To unsubscribe from this group, send email to 
g3-5-list-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---

Reply via email to